$26.99
21 matched sets (42 total pieces)
8-32 machine-thread hardware
Black-oxide screw finish
Hardware type
Fastener type
Fastener size
Fastener length
Head style
Drive type
Thread type
Material
Finish
Required hole size
Package quantity
Custom Speaker Pods and installations accepting 8-32 through-bolted hardware
21 x 8-32 x 3/4-inch button-head machine screws
21 x 8-32 nylon-insert locknuts
3/32-inch Allen wrench for screws
11/32-inch wrench or socket for nuts
Drill and correctly sized bit if new holes are required
Pass each screw through the pod and mounting panel, secure it with a nylon-insert locknut, and tighten evenly without distorting the plastic.
Compatibility depends on the hardware pack and mounting application. Check the fastener size, required hole size, and Compatible With information before ordering. Contact us if you are unsure which hardware kit fits your speaker pods.
Required tools vary by hardware kit. Common tools include a drill, the appropriate drill bit, a marker, pliers, a hex key, and a wrench or socket. Refer to the Required Tools and Installation Notes sections for this product.
Machine screws used with locknuts or threaded inserts create strong, serviceable mounting points. Threaded hardware is especially useful when speakers or pods may need to be removed later because it is less likely to damage or strip the mounting surface after repeated use.
Package contents vary by product. Review the What’s Included section for the exact fasteners, inserts, locknuts, drill bits, bushings, or other installation components supplied with this hardware pack.
Tighten the fasteners evenly until the speaker or pod is securely mounted. Do not overtighten them, as excessive force can distort the speaker frame, damage the mounting surface, or crush the plastic.
Machine screws, locknuts, and threaded inserts can generally support future removal and service when they remain undamaged. Inspect every component before reuse and replace any fastener with damaged threads, corrosion, or visible deformation.
