Down4Sound SFX65-8P
6.5 IN
SIZE
200 W
RMS
8 Ohm
IMPEDANCE
92 dB
SENSITIVITY
$34.99
Rating:
Why it works in pod builds
Will it fit your pod?
Check the measurements and compare with your pod before you buy.
Overall diameter (OD)
Cutout diameter (CD)
Mounting Depth (MD)
Compare these measurements with the speaker-opening specifications on your pod product page.
Nominal speaker size alone does not guarantee fit.
Power it right
Match your amplifier output to the number of speaker your running and the final wired impedance.
Recommended amp output
per speaker at 4 Ohm
Per Speaker
each
Rated impedance per speaker.
Final load matters
Rated impedance per speaker.
Materials and Construction
Cone
Surround
Basket
Magnet
Technical specifications
Type
Fs
Qms
Qes
Qts
Re
Le
Xmax
Vas
COMMON QUESTIONS
Choosing speakers for your pods does not need to be complicated. Start with the opening size, consider how you want the system to sound, and make sure the speakers and amplifier work well together.
Not necessarily. Speaker size describes the general category, but cutout diameter, mounting depth, and outside diameter can differ between models. Compare the dimensions listed above with your speaker pod before ordering. We try to only sell speakers that fit our pods, but some speakers listed here are too deep for certain applications.
Choose an amplifier that delivers approximately 200 watts RMS per channel at 8 ohms. RMS power is the important rating for matching an amplifier; do not use peak-power ratings for this comparison.
Most speakers can be heard using head unit power. How loud they will be depends on the sensitivity of the speaker and the output power capability of the head unit. Head units are only designed to handle 4-ohm speaker loads, wiring a dual 4-ohm speaker setup in parallel on a head unit is not recommended. To get the most out of the speakers we sell here it is recommended to get an amplifier.
Manufacturer grilles are not designed to fit many speaker-pod installations. Our Thump Covers provide a clean, durable speaker-cover solution for almost every pod application.
Additional wiring may be required for proper installation. Please visit our accessories section for additional components.
Our speaker mounting hardware kit is the best way to install your speakers.
Compare these three measurements with the pod:
- Cutout diameter (CD): the opening required for the speaker basket
- Mounting depth (MD): the space required behind the mounting surface
- Overall diameter (OD): the speaker’s total outside width
The speaker must fit all three measurements—not merely share the advertised speaker size.
Custom cutouts are available on most speaker pods. Please leave a note on the order form with your cutout dimensions.
Complete your build
Wire and Accessories
Premium wire for clean power and reliable performance.