8″ Front Door Speaker Pods for the 2021-2026 Ford F-150 & 2023-2026 F-250 & F-350
Rating:
Price range: $198.99 through $225.99
Price range: $179.09 through $225.99
Door speaker pods and grilles are sold as a pair (driver and passenger side). Quantity 1 is all you need. Universal Pods are sold as a single unless noted otherwise. Speakers not included.
Overview
This Front Door speaker pod is designed for the 2021-2024 F150, F250 and supports a 8in layout designed to expand beyond factory speaker mounting limitations.
Speaker Combination Purpose
Key Advantage
Performance Focus
This configuration targets Louder front stage and delivers Stronger midbass impact compared to factory speaker layouts.
Beyond Factory Speaker Replacement
Instead of simply replacing factory speakers, this configuration expands what is possible by supporting additional or larger drivers and more flexible system design.
Configuration Type
As a Output focused design, this layout provides greater flexibility when planning system upgrades.
System Pairing
Common system pairing: recommended with amplification for best performance.
Installation
Installation complexity: Moderate.
These pods bolt onto the factory panel and require drilling mounting holes and cutting for speaker depth clearance to ensure proper installation.
Fitment
Designed specifically for the 2021-2024 F150, F250, this pod is sold in pairs (driver and passenger sides included) and integrates with factory panel geometry.
Please Note: Speaker pods may interfere with functionality of certain items within the vehicle (glove box etc.). It is recommended that you test fit all pods before installing.
Standard Finishes
Premium Finishes
Cutout Sizes
Size | Outside Dia. | Cutout Dia. | Depth* |
|---|---|---|---|
2in | 2.5in | 1.75in | 2in |
3.5in | 3.8in | 2.8in | 2.5in |
4in | 4.5in | 3.5in | 2in |
6.5in | 7.2in | 5.7in | 2.75in |
8in | 8.1in | 7.1in | 2.75in |
10in | 10.25in | 9.2in | 3.2in |
12in | 12.4in | 11in | 3in |
There is no standard hole size for a given speaker size. We have determined the best case dimensions for each speaker size based on an average of dimensions from multiple speaker brands, and this cutout dimension is listed on the chart below. If the listed dimensions will not accommodate your speakers you can let us know the cutout diameter and/or speaker model number in the note section at checkout so that we can made the necessary adjustments.
*PODS WITH CUSTOM CUTS ARE NOT ELIGABLE FOR RETURN OR EXCHANGE*
Sold as a pair — Quantity 1 includes two pods: one for the driver side and one for the passenger side
Our custom pods are designed to fit the contours of your vehicle panels perfectly. Before purchasing, please verify that your panel matches the panel in the photo gallery.
What is in the box?
- 1 pair of Speaker Pods
- 1 pod mounting hardware kit
Warranty:
- Speaker Pods come with a 1 year manufacturer
- Additional warranty information can be found >> here <<
Note:
- These pods are designed for audio customizations and will require trimming of the factory panel and proper sound system setup to maximize performance.
- Speaker pods may interfere with the functionality of certain interior components (such as the glove box, center console, airbags or door storage areas) depending on your speaker size and vehicle layout. It is strongly recommended to test fit all pods before installation to ensure proper clearance and fitment.
Jose A Ocampo (verified owner) –
Nicely built, beautifully finished, but…
Considering the average 8” speaker is taller than your average 6.5” woofer or midrange, I was hoping these would allow for better motor clearance since they are on the outside of the door, protruding from the panels. I purchased, installed, and tried these single 8” pods for my 2023 F-150 and my D4S Hexicone 8s didn’t fit, my Audio Dynamics 2000 series 8s didn’t fit, and not even my Kicker KM8 marine 8s fit in these; at least not without a 1/4” to 1/2” spacer ring, which looks rather ugly. I used a 1/2” DS18 LED spacer ring, but didn’t hook up the lights since it already looked goofy. Most pro audio 8s have pretty beefy motors and unfortunately, this single 8 pod doesn’t provide that great of a mounting depth because the speaker magnets will hit the inner door skin (metal). I already hacked up my panels to fit these pods and really don’t wanna hack up the inner door metal to get fairly average drivers to work in these. Especially not on such a new truck.
Other than the mounting depth being a bummer, these are awesome pods overall. Install was super easy, as usual with CSP products ??