$46.99
Unleash the full potential of your speaker pods with our robust 10-foot Sky High Car Audio Speaker Wire Kit for Speaker Pods. Our experts at Custom Speaker Pods designed this kit specifically for wiring up to 4 total speakers.  There is also 24-foot kit that will satisfy those high speaker count speaker pods. Rest assure, your speakers will be powered for optimal sound quality while using any of our kits.  This is an audio wiring upgrade you can’t do without.
All of our Speaker Wire Kits for Speaker Pods include premium 14-AWG OFC Sky High Car Audio Speaker Wire. This wire was carefully chosen for its premium quality and superior conductivity. Perfectly matched with our Amplifiers, Speakers, and Custom Speaker Pods. The 10-foot Sky High Car Audio Speaker Wire Kit for Speaker Pods ensures you will experience sound like never before.
With our 10-foot Sky High Car Audio Speaker Wire Kit for Speaker Pods, installation is a breeze. In addition to the excellent speaker wire, we provide you with our exclusive 12-AWG Water-Proof Plugs, WAGO Brand lever nuts, water-proof butt connectors with heat-shrink, spade connectors with heat-shrink, ferrules, and zip ties.
Need help with your installation? Visit our information page to find answers to your questions as well as detailed wiring diagrams for your specific speaker setup.Â
Need additional technical assistance? Our phone number and email can be found on our contact page.Â
We believe in delivering the best quality products to our customers, that’s why all our Speaker Wire Kit’s include industry leading Sky High Car Audio Speaker Wire.
Beyond the car audio, this kit is great for home audio setups or professional studios, delivering clear, high-fidelity sound in any environment. Our Instagram Page showcases more of our top-notch products.
Ready to experience the difference? Get our Speaker Wire Kit today!
This Speaker Wire Kit is intended for connectorizing up to two speakers per speaker pod. This Speaker Wire Kit is for wiring up your speakers and or tweeters within your speaker pods within your door cavity. This kit is not intended for speaker wire runs outside of the door cavity. (Please refer to our Speaker Wire Kits for Amplifiers for wire runs outside of the door cavity.) The opposite end of this connector will either be spliced to existing factory wire or a wire run from an amplifier. Please refer to your matching Custom Speaker Pods Wiring Diagram for more detail.
Don’t make unnecessary trips to the hardware store or car audio shop. Get everything you need right here within this kit. Don’t jerry rig connections together because you don’t have what you need. Get everything you need right here within this kit.
| IMAGE | QTY | UOM | DESCRIPTION |
|
|
10 |
Feet |
14-AWG OFC Sky High Car Audio Speaker Wire Red/BlackThis high quality speaker wire will last the life of your vehicle. Is this speaker wire a bit overkill? Yes. This speaker wire is oversized for a reason though. You know installing speaker wire is no easy task. Install this speaker wire once and forget about it. No need to go back to upgrade the speaker wire later when you decide to upgrade your speakers. This wire can handle anything you throw at it. |
 |
4 |
Each |
Custom Speaker Pods Exclusive 12awg 2-Pin Waterproof Plug, Male and FemaleYou will not find this type of plug anywhere else. This plug was specifically designed with the rigors of car audio in mind. The inside of the door panel is a nasty environment and this plug can handle it. The Pigtails are Manufactured with a High Grade-High Strand 12-AWG OFC Speaker Wire. |
 |
18 |
Each |
Waterproof Self Solder Self Seal Heat Shrink Butt Connector 12-10 AWGNo need to fiddle around with a solder gun, solder, flux, or specialty heat shrink that you will forget to put on after you have already soldered the connection. Our butt connectors provide you with a one step, all-in-one solution. These butt connectors provide the solder to make the electrical connection, the strength to hold the connection together, and the seal to keep out the moisture. Simply slide the butt splice over the twisted wire connection. Heat the butt splice and watch the magic happen. For best results we recommend a heat gun, but a standard cigarette lighter will work in a pinch. |
 |
4 |
Each |
WAGO 3-Wire Lever Splicing Connector, 12-24 AWG (221-413)This is the best device to connect multiple speaker wires to one another, hands down. They are an excellent substitute for crimp connectors or T-Tap connectors as they are more compact and much easier to use.  This is the brand name WAGO, not some cheap knock-off. These are designed and manufactured in Germany, so you know they’re of high quality.
|
|
|
6 |
Each |
Red Ferrule 12-AWGOur ferrules not only give you that finished look at the ends of your speaker wire, but what they really provide is a solid electrical connection.  Plug the speaker wire with the attached ferrule into the input of the amplifier. Tighten down the setscrew and let it bite into the ferrule rather than a bunch of loose copper wire strands. For best results we suggest using a ferrule crimping tool, also available for purchase within our store. |
 |
6 |
Each |
Black Ferrule 12-AWGOur ferrules not only give you that finished look at the ends of your wire, but what they really provide is a solid electrical connection.  Plug the speaker wire with the attached ferrule into the input of the amplifier. Tighten down the setscrew and let it bite into the ferrule rather than a bunch of loose copper wire strands. For best results we suggest using a ferrule crimping tool, also available for purchase within our store. |
 |
10 |
Each |
Female Insulated Heat Shrink Spade Wire Connector Crimp Terminal 12-10 AWGThese are spade connectors built with Heat-Shrink to give you that tight water-proof fit you are looking for on your speaker terminals. |
 |
10 |
Each |
4-inch zip tiesA handful of Zip Ties to give you the ability to tie off your loose speaker wire to give you that clean, organized, and rattle free build. |
**Free shipping to US only, excluding Alaska and Hawaii.
